HP 273914-B21 Smart Array 6400 Series Controllers User Guide - Page 18
Connecting external storage, SCSI cable part numbers, provided with the server.
UPC - 613326361313
View all HP 273914-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 HP Smart Array 6400 Series Controllers User Guide When you have finished installing drives, continue with the next step. − If the drives are hot-pluggable, go to step 3. − If the drives are not hot-pluggable, go to step 4. 3. Attach the internal point-to-point SCSI cable (provided with the server) from the internal connector of the controller to the hot-plug drive cage. Installation of the hot-pluggable drives is complete. 4. For each SCSI bus, manually set the SCSI ID on each drive to a unique value in the range of 0 to 15, except 7 (which is reserved for controller use). For detailed instructions, consult the documentation that is provided with the drive. 5. Attach a multi-device SCSI cable from the internal connector of the controller to the non-hot-pluggable hard drives. (The cable may have been provided with the server.) 6. Replace the access panel, and secure it with the thumbscrews if any are present. CAUTION: Do not operate the server for long periods without the access panel. Operating the server without the access panel results in improper airflow and improper cooling that can lead to thermal damage. Connecting external storage 1. On the rear of the server, connect the external cable to the VHDCI connector on the controller, and tighten the lock screws on the cable connector. 2. Attach the other end of the cable to the storage enclosure, and tighten the lock screws on the cable connector. SCSI cable part numbers NOTE: If you require additional cables, order them by the option kit number.