HP 300X HP JetDirect External Print Servers 300X, 500X 170X, EX Plus Hardware - Page 18
For the 300X or 500X Ethernet print servers J3263A or, The HP JetDirect 500X Token Ring and 300X
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. For the 300X or 500X Ethernet print servers (J3263A or J3265A), verify that the auto-negotiation switches are in their default positions-all down. (For other options, see page 1-9.) Figure 2.2 Hardware connections using a U.S. power module for the HP JetDirect J3265A Print Server Note In the following steps, the circled numbers correspond to those in Figure 2.2. The HP JetDirect 300X, 170X, and EX Plus have one printer port . The HP JetDirect 500X Token Ring and 300X have no BNC port . On the HP JetDirect 500X and 300X, the RJ-45 connector is used for either 10 or 100 Mbps operation. The JetDirect 170X has no BNC port . 5. Connect the print server to the network or . 6. Connect the print server to the printer(s) , , and . If you are attaching only one printer to the 500X, HP recommends that you attach that printer to Port 1 . If you are using DLC/LLC network protocols, your printer must be connected to Port 1 (the DLC/LLC protocol is supported only on Port 1). 7. Plug the power module into the power receptacle in the back of the print server . 2-2 Hardware Installation