HP 4345mfp HP LaserJet 4345mfp - User Guide - Page 231
Replacing accessories or accessory components, Light, Explanation and solution
UPC - 829160499956
View all HP 4345mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Light Off Explanation and solution ● The MFP might be in sleep mode. Press any button on the control panel. ● The accessory is not receiving power. Turn the MFP power off. Check that the accessory is properly seated on and connected to the MFP, without any gaps between the MFP and the accessory. Turn the MFP power on. ● The accessory might have been disconnected and reconnected while the MFP power was on. 66.12.99 REINSTALL OUTPUT DEVICE appears on the control-panel display. Reconnect the cable on the accessory. ● The job might have stalled between the MFP and the accessory. Processing Job appears on the control-panel display. Turn the MFP power off and then on. Replacing accessories or accessory components If you are unable to resolve problems that are indicated by the 3-bin mailbox or stapler/ stacker accessory lights, contact the HP Customer Care Center. (See HP customer care.) If an HP Customer Care Center representative recommends replacement of the 3-bin mailbox, the stapler/stacker, or the staple cartridge, see Ordering parts, accessories, and supplies and Part numbers for information about ordering a replacement. ● For the steps to replace the entire 3-bin mailbox or the entire stapler/stacker, see the install guide that came with the accessory. ● For the steps to replace the staple cartridge, see Loading staples. ENWW Understanding accessory lights for the 3-bin mailbox and stapler/stacker 217