HP 5600 TFT5600 Rackmount Keyboard and Monitor (RKM) Model M5FAE Maintenance a - Page 37
Removing the AC Brick, Unplug the AC brick from the controller board and lift the brick off
UPC - 720591607586
View all HP 5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4-18 Compaq TFT5600 Rackmount Keyboard and Monitor (RKM) Maintenance and Service Guide Removing the AC Brick IMPORTANT: You must remove the rear cover before you remove the AC brick. To remove the AC brick: 1. Disconnect all cables from their source. 2. Unplug the AC brick from the controller board and lift the brick off of the Velcro. Figure 4-15. Removing AC brick IMPORTANT: Make sure the AC brick is properly located on the Velcro so that the rear cover can be installed. To replace the AC brick, reverse the above procedure.
4-18
Compaq TFT5600 Rackmount Keyboard and Monitor (RKM) Maintenance and Service Guide
Removing the AC Brick
IMPORTANT:
You must remove the rear cover before you remove the AC brick.
To remove the AC brick:
1.
Disconnect all cables from their source.
2.
Unplug the AC brick from the controller board and lift the brick off of
the Velcro.
Figure 4-15.
Removing AC brick
IMPORTANT:
Make sure the AC brick is properly located on the Velcro so that the rear
cover can be installed.
To replace the AC brick, reverse the above procedure.