HP 6120G/XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 13
General Setup Procedure for 802.1X Access Control, Configuring Switch Ports as 802.1X Authenticators
View all HP 6120G/XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Terminology 10-6 General 802.1X Authenticator Operation 10-9 Example of the Authentication Process 10-9 VLAN Membership Priority 10-10 General Operating Rules and Notes 10-12 General Setup Procedure for 802.1X Access Control 10-14 Do These Steps Before You Configure 802.1X Operation 10-14 Overview: Configuring 802.1X Authentication on the Switch . . . . . 10-17 Configuring Switch Ports as 802.1X Authenticators 10-18 1. Enable 802.1X Authentication on Selected Ports 10-19 A. Enable the Selected Ports as Authenticators and Enable the (Default) Port-Based Authentication 10-19 B. Specify User-Based Authentication or Return to Port-Based Authentication 10-20 Example: Configuring User-Based 802.1X Authentication . . . . 10-21 Example: Configuring Port-Based 802.1X Authentication . . . . 10-21 2. Reconfigure Settings for Port-Access 10-21 3. Configure the 802.1X Authentication Method 10-24 4. Enter the RADIUS Host IP Address(es 10-25 5. Enable 802.1X Authentication on the Switch 10-25 6. Optional: Reset Authenticator Operation 10-26 7. Optional: Configure 802.1X Controlled Directions 10-26 Wake-on-LAN Traffic 10-27 Operating Notes 10-27 Example: Configuring 802.1X Controlled Directions 10-28 802.1X Open VLAN Mode 10-29 Introduction 10-29 VLAN Membership Priorities 10-30 Use Models for 802.1X Open VLAN Modes 10-31 Operating Rules for Authorized-Client and Unauthorized-Client VLANs 10-36 Setting Up and Configuring 802.1X Open VLAN Mode 10-40 802.1X Open VLAN Operating Notes 10-44 Option For Authenticator Ports: Configure Port-Security To Allow Only 802.1X-Authenticated Devices 10-45 xii