HP 6120G/XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 238
Refer to Appendix G, Network Out-of-Band Management in, Configuring Secure Shell SSH, listen
View all HP 6120G/XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Configuring Secure Shell (SSH) Configuring the Switch for SSH Operation [mac ] Allows configuration of the set of MACs that can be selected. Valid types are: • hmac-md5 • hmac-sha1 • hmac-sha1-96 • hmac-md5-96 Default: All MAC types are available. Use the no form of the command to disable a MAC type. [port < 1-65535 | default >] The TCP port number for SSH connections (default: 22). Important: See "Note on Port Number" on page 6-19. [timeout < 5 - 120 >] Sets the maximum length of time (in seconds) allowed for initial protocol negotiation and authentication. Default: 120 seconds [listen ] The listen parameter is available only on switches that have a separate out-of-band management port. Values for this parameter are: • oobm - inbound SSH access is enabled only on the out-of-band management port. • data - inbound SSH access is enabled only on the data ports. • both - inbound SSH access is enabled on both the out-of-band management port and on the data ports. This is the default value. Refer to Appendix G, "Network Out-of-Band Management" in the Management and Configuration Guide for more information on out-of-band management. The listen parameter is not available on switches that do not have a separate out-of-band management port. 6-18