HP 6120G/XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 375
Option For Authenticator Ports: Con Port-Security To Allow Only 802.1X-Authenticated Devices
View all HP 6120G/XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
Configuring Port-Based and User-Based Access Control (802.1X) Option For Authenticator Ports: Configure Port-Security To Allow Only 802.1X-Authenticated Devices ■ The first client to authenticate on a port configured to support multiple clients will determine the port's VLAN membership for any subsequent clients that authenticate while an active session is already in effect. Option For Authenticator Ports: Configure Port-Security To Allow Only 802.1X-Authenticated Devices If 802.1X authentication is disabled on a port or set to authorized (Force Authorize), the port can allow access to a non-authenticated client. PortSecurity operates with 802.1X authentication only if the selected ports are configured as 802.1X with the control mode in the port-access authenticator command set to auto (the default setting). For example, if port A10 was at a non-default 802.1X setting and you wanted to configure it to support the portsecurity option, you would use the following aaa port-access command: Control mode required for PortSecurity Support Figure 10-8. Port-Access Support for Port-Security Operation 10-45