HP 6120G/XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 99
Prerequisites, aaa port-access controlled-direc, tions, aaa port, access controlled-directions
View all HP 6120G/XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Web and MAC Authentication Configuring Web Authentication Syntax: aaa port-access controlled-directions After you enable web-based authentication on specified ports, you can use the aaa port-access controlled-directions command to configure how a port transmits traffic before it successfully authenticates a client and enters the authenticated state. both (default): Incoming and outgoing traffic is blocked on a port configured for web authentication before authentication occurs. in: Incoming traffic is blocked on a port configured for web authentication before authentication occurs. Outgoing traffic with unknown destination addresses is flooded on unauthenticated ports configured for web authentication. Prerequisites: As implemented in 802.1X authentication, the disabling of incoming traffic and transmission of outgoing traffic on a web-authenticated egress port in an unauthenticated state (using the aaa portaccess controlled-directions in command) is supported only if: ■ The 802.1s Multiple Spanning Tree Protocol (MSTP) or 802.1w Rapid Spanning Tree Protocol (RSTP) is enabled on the switch. MSTP and RSTP improve resource utilization while maintaining a loop-free network. The port is configured as an edge port in the network using the spanning-tree edge-port command. 3-22