HP 8/40 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 183
Internet Group Management Protocol Commands, clear ip igmp group
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
DRAFT: BROCADE CONFIDENTIAL Internet Group Management Protocol Commands Chapter 10 clear ip igmp group Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Clears information related to learned groups in the IGMP protocol module. clear ip igmp group [A.B.C.D [interface tengigabitethernet slot/port | interface port-channel number | interface vlan vlan_id] | interface tengigabitethernet slot/port | interface port-channel number | interface vlan vlan_id] A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. interface Use this keyword to specify any of the following interfaces: port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. interface Use this keyword to specify any of the following interfaces: vlan vlan_id Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. There are no defaults for this command. Privileged EXEC mode Use this command to clear the group information in the IGMP database, including entries for either a specific group on all interfaces or specific groups on specific interfaces. There are no usage guidelines for this command. To clear information for all groups in the IGMP protocol: switch#clear ip igmp group none Converged Enhanced Ethernet Command Reference 165 53-1001762-01