HP 8/40 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 185
debug ip igmp all, User Guidelines
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
DRAFT: BROCADE CONFIDENTIAL debug ip igmp all 10 debug ip igmp all Synopsis Displays all IGMP information. debug ip igmp {all | group [A.B.C.D [interface tengigabitethernet slot/port|interface port-channel number| interface vlan vlan_id]]} Operands Description Defaults Command Modes User Guidelines Example See Also all Displays all values. A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. vlan vlan_id Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. Displays all of the IGMP packets received and sent, and IGMP-host related events. There are no defaults for this command. Privileged EXEC mode There are no user guidelines for this command. none none Converged Enhanced Ethernet Command Reference 167 53-1001762-01