HP 8730w HP EliteBook 8730w Mobile Workstation - Maintenance and Service Guide - Page 86
Remove the 12 Torx T8M2.5×9.0 screws, and the fingerprint reader board cable
UPC - 884962212455
View all HP 8730w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
3. Remove the 12 Torx T8M2.5×9.0 screws (1) and two PM2.5×4.0 screws (2) that secure the top cover to the base enclosure. 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the TouchPad board cable (1) and the fingerprint reader board cable (2) from the system board. 78 Chapter 4 Removal and replacement procedures
3.
Remove the 12 Torx T8M2.5×9.0 screws
(1)
and two PM2.5×4.0 screws
(2)
that secure the top
cover to the base enclosure.
4.
Turn the computer right-side up, with the front toward you.
5.
Disconnect the TouchPad board cable
(1)
and the fingerprint reader board cable
(2)
from the
system board.
78
Chapter 4
Removal and replacement procedures