HP A1310n Getting Started Guide - Page 32
Connecting 4.1 (4 speakers and a subwoofer) audio speakers
View all HP A1310n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7 Plug in the speaker system power. 8 Turn on the speaker system. Step 8 is optional for a two-speaker setup. 9 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Type 3 connectors: See "Configuring Audio Output with Multi-channel Sound Manager" on page 37. • Type 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 38. The following diagram shows a typical 2.1 audio installation: OUT OUT Connecting 4.1 (4 speakers and a subwoofer) audio speakers To connect two front speakers, two rear speakers, and a subwoofer for four-channel (4.1 speaker) output: 1 Turn off the PC. . 2 Connect the front speaker cable to the lime-green Audio Line Out connector that matches the back of your PC. 3 6 S • Type 3 is three connectors • Type 6 is six connectors • Type S is sound card 26 Getting Started Guide