HP A1310n Getting Started Guide - Page 33
Type 6 connectors: See Configuring Audio Output with Sound Effect
View all HP A1310n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Connect the rear speaker cable to the black connector that matches the back of your PC. 3 IN 6 S For type 3 connectors, the blue Audio Line In connector functions as a rear line out when a multichannel audio configuration is activated. 4 Connect the cables to the audio system. 5 Connect the front and rear speakers to the subwoofer. Refer to the speaker documentation. 6 Turn on the PC. NOTE: Always turn on the PC before you turn on the speaker system. 7 Plug in the speaker system power. 8 Turn on the speaker system. 9 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Type 3 connectors: See "Configuring Audio Output with Multi-channel Sound Manager" on page 37. • Type 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 38. The following diagram shows a typical 4.1 audio installation: OUT IN Configuring Speaker and Sound Options 27