HP AP775A Cisco MDS 9000 Family Fabric Manager Configuration Guide - Release 4 - Page 1238

Create RMON Alarms in Fabric Manager Chapter 59 Configuring RMON Send documentation comments to [email protected] Enabling 32-Bit and 64-Bit RMON Alarms for Physical Components To configure an RMON alarm for a physical component for a 64-bit alarm using Device Manager, follow these steps: Step 1 Choose Admin > Events > Threshold Manager and click the Physical tab. You see the Threshold Manager dialog box with the Physical tab for the 64-bit alarm selected as shown in Figure 59-9. Figure 59-9 Physical Tab for the 64-Bit Alarm Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Check the check box in the Select column for each variable to monitor. Enter the threshold value in the Value column. Enter the sampling period in seconds. Choose one of the following severity levels to assign to the alarm: Fatal(1), Warning(2), Critical(3), Error(4), Information(5). Click Create. Confirm the operation to define an alarm and a log event when the system prompts you to define a severity event. If you do not confirm the operation, the system only defines a log event. Click More, then click the 64-bit Alarms tab in the Threshold Manager dialog box to verify the alarm you created (see Figure 59-10). 59-10 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x