HP AP775A Cisco MDS 9000 Family Fabric Manager Configuration Guide - Release 4 - Page 717

Chapter 32 Configuring Fibre Channel Routing Services and Protocols FSPF Global Configuration Send documentation comments to [email protected] Table 32-3 LSR Default Settings LSR Option Default Description Acknowledgment 5 seconds The time a switch waits for an acknowledgment from the LSR interval (RxmtInterval) before retransmission. Refresh time (LSRefreshTime) 30 minutes The time a switch waits before sending an LSR refresh transmission. Maximum age (MaxAge) 60 minutes The time a switch waits before dropping the LSR from the database. The LSR minimum arrival time is the period between receiving LSR updates on this VSAN. Any LSR updates that arrive before the LSR minimum arrival time are discarded. The LSR minimum interval time is the frequency at which this switch sends LSR updates on a VSAN. Configuring FSPF on a VSAN To configure an FSPF feature for the entire VSAN using Fabric Manager, follow these steps: Step 1 Expand a Fabric, expand a VSAN and select FSPF for a VSAN that you want to configure for FSPF. You see the FSPF configuration in the Information pane as shown in Figure 32-4. Figure 32-4 FSPF General Information Step 2 Step 3 The RegionID, Spf Comp Holdtime, LSR Min Arrival, and LSR Min Interval field values are applied across all interfaces on the VSAN. You can change them here or, if they do not exist create them here. Click Apply Changes to save these changes, or click Undo Changes to discard any unsaved changes. Resetting FSPF to the Default Configuration To return the FSPF VSAN global configuration to its factory default using Fabric Manager, follow these steps: Step 1 Step 2 Expand a Fabric, expand a VSAN and select FSPF for a VSAN that you want to configure for FSPF. You see the FSPF configuration in the Information pane as shown in Figure 32-4. Check the SetToDefault check box for a switch. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 32-5