HP AP775A Cisco MDS 9000 Family Fabric Manager Configuration Guide - Release 4 - Page 337

Chapter 14 Configuring FlexAttach Virtual pWWN Using the Server Admin FlexAttach Wizards Send documentation comments to [email protected] Moving a Server to Another Port or Switch Using the Move Server wizard, you can move a server to another port on the same NPV device or another NPV device without changing the SAN. This is accomplished by moving the virtual pWWN to the new port. No change is needed if FlexAttach was configured using the physical port WWN of the server to the virtual port WWN mapping. To move a server to a different port in the same switch, or in a different switch, follow these steps: Step 1 In the Fabric Manger window, select Tools > FlexAttach > Move Server. The Move Server wizard is displayed. (Figure 14-14) Figure 14-14 Move Server Wizard Step 2 Step 3 In the Move Server window, click the Another Port on the Same Switch radio button or click the Another Port on a Different Switch radio button. Click Next. The Move Port window is displayed. (Figure 14-15) OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 14-15