HP AP775A Cisco MDS 9000 Family Fabric Manager Configuration Guide - Release 4 - Page 343

Chapter 14 Configuring FlexAttach Virtual pWWN Using the Server Admin FlexAttach Wizards Send documentation comments to [email protected] Figure 14-20 Server WWN Entries Step 7 Step 8 In the Server WWN window, enter the existing FlexAttach server virtual port WWN to be replaced, and the new server physical port WWN. Click Finish to complete the FlexAttach configuration for the new server. Replacing the Server to a Different Port on the Same Switch To replace a server with a spare server on a different port in the same switch, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 In the Fabric Manger window, select Tools > FlexAttach > Replace Server. The Replace Failed Server wizard is displayed. (Figure 14-18) In the Replace Failed Server wizard, click the With Spare Server on Same NPV Switch radio button. Click Next. The Choose Failed Port window is displayed. (Figure 14-19) In the Choose Failed Port selection window, from the Select a Switch drop-down list, select the switch. From the list of interfaces displayed, select the port from which the server needs to be detached. Click Next. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 14-21