HP Chromebook x2 11 inch 11-da0000 Maintenance and Service Guide - Page 35
Right speaker, Peel the cable off the computer
View all HP Chromebook x2 11 inch 11-da0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 5-5 Pogo connector and cable description and part number Description Pogo connector and cable Spare part number M73948-001 Before removing the pogo connector and cable, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 22). 2. Remove the display assembly (see Display assembly on page 23). 3. Disconnect the battery cable from the system board (see Battery on page 25). Remove the pogo connector and cable: 1. Remove the two Phillips M1.0 × 1.6 screws (1) that secure the pogo connector to the computer. 2. Disconnect the cable from the ZIF connector on the system board (2). 3. Peel the cable off the computer (3). Reverse this procedure to install the pogo connector and cable. Right speaker To remove the right speaker, use this procedure and illustration. Table 5-6 Right speaker description and part number Description Speaker Kit Before removing the right speaker, follow these steps: Spare part number M73457-001 Component replacement procedures 29