HP Chromebook x2 11 inch 11-da0000 Maintenance and Service Guide - Page 37

Rear camera, Prepare the computer for disassembly see

Page 37 highlights

3. Remove the two Phillips M1.6 × 3.0 screws (3) that secure the speaker to the computer. 4. Lift the switch holder straight up and out of the computer (4). 5. Disconnect the speaker cable from the system board (5). 6. Remove the speaker from the computer (6). Reverse this procedure to install the left speaker. Rear camera To remove the rear camera, use this procedure and illustration. Table 5-8 Rear camera descriptions and part numbers Description Rear camera Spare part number M73446-001 Before removing the rear camera, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 22). 2. Remove the display assembly (see Display assembly on page 23). 3. Disconnect the battery cable from the system board (see Battery on page 25). 4. Remove the left speaker (see Left speaker on page 30). Remove the rear camera: 1. Disconnect the camera cable from the system board (1). Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

3.
Remove the two Phillips M1.6 × 3.0 screws
(3)
that secure the speaker to the computer.
4.
Lift the switch holder straight up and out of the computer
(4)
.
5.
Disconnect the speaker cable from the system board
(5)
.
6.
Remove the speaker from the computer
(6)
.
Reverse this procedure to install the left speaker.
Rear camera
To remove the rear camera, use this procedure and illustration.
Table 5-8
Rear camera descriptions and part numbers
Description
Spare part number
Rear camera
M73446-001
Before removing the rear camera, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
22
).
2.
Remove the display assembly (see
Display assembly
on page
23
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
25
).
4.
Remove the left speaker (see
Left speaker
on page
30
).
Remove the rear camera:
1.
Disconnect the camera cable from the system board
(1)
.
Component replacement procedures
31