HP Cisco MDS 9124 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 299

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] PORT_SECURITY Messages This section contains the port security (PORT_SECURITY) messages. PORT_SECURITY-2 Error Message PORT_SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec] for [chars]. Explanation Memory allocation failed for the entity and size shown in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to [chars]. Explanation The feature is unavailable and will be disabled now. Recommended Action Install the correct license and reenable. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-3-BINDING_CONFLICT: [chars] in VSAN [dec]. Explanation An already logged in device is in conflict with the port security manager active binding configuration. The error message indicates the WWN of the login entity, interface and the VSAN. Recommended Action For port security, the autolearn feature can be used with activation to prevent this. This violating device or switch will be logged out. Introduced Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT_SECURITY-3-BINDING_VIOLATION: [chars] in VSAN [dec]. Explanation A login occurred that violates the port security manager (PSM) binding configuration. The error message indicates the WWN of the login entity and the VSAN. Recommended Action Only entries in the activated database of PSM can log in. Change the configuration and activate it again. Introduced Cisco MDS SAN-OS Release 1.3(4a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-263