HP Cisco MDS 9124 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 349

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] SPAN-5 Error Message SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress session. Explanation Generation 2 fabric switches support only one VSAN filter for an egress SPAN session. If a VSAN is specified, SPAN will default to use all VSANs for the egress SPAN session. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source interface [[chars]] in dir [[chars]] removed from session [[dec]]. Explanation Interface level VSAN filters are not supported. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-5-SPAN_CFG_REJECT_VSAN_SRC_PRESENT: Source VSAN [[dec]] removed from session [[dec]]. Explanation Source VSANs were removed from the session because mixing of the interface and VSANs is not supported. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-5-SPAN_PSS_CORRUPTION: Span is starting stateless due to pss corruption. Explanation Because of an unrecoverable persistent storage service (PSS) corruption error, the switched port analyzer (SPAN) starts stateless without any configuration. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SPAN-5-STATELESS_RESTART: Span is restarting stateless. Explanation Because of an unrecoverable error, the switched port analyzer (SPAN) is starting stateless. The currently active sessions will not be preserved. You will have to reenter the entire configuration. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-313