HP Cisco MDS 9124 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 493

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message WWN-6-BECAME_ACTIVE: Became ACTIVE from standby mode. Explanation The WWN manager on the standby supervisor module became active and it is ready to serve client requests for WWNs. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-BECAME_STDBY: Became STANDBY from active mode. Explanation The WWN manager became standby from active mode. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-EXCESSIVE_DELAY: [chars]. Explanation Excessive time taken for a processing event. The description of the event is shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]. Explanation The WWN manager was unable to send a heartbeat to the system manager. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-GENERAL_EVENT: [chars]. Explanation The WWN manager has generated an important event. The description of the event is shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message WWN-6-PSS_CREATED: [chars] PSS Created. Explanation One of the persistent information databases of the WWN manager has been recreated. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-457