HP Cisco MDS 9124 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 181

Chapter 9 Cisco SME Troubleshooting Cluster Recovery Scenarios Send documentation comments to [email protected] On the offline switch (switch2), shut down the cluster by performing this task: Step 1 Step 2 Command switch# config t switch(config)# sme cluster ABC switch(config-sme-cl)# shutdown Purpose Enters configuration mode. Shuts down the ABC cluster on the offline switch Note Repeat the procedure for every offline switch. On the cluster master switch, delete the offline switch (switch2) and then delete the cluster by performing this task: Step 1 Step 2 Command switch# config t switch(config)# sme cluster ABC switch(config-sme-cl)# no node switch2 Step 3 switch(config)# no sme cluster ABC Purpose Enters configuration mode. Deletes switch2 from the ABC cluster configuration. Note Repeat this step for every offline switch that was shut down in the first procedure. Deletes the ABC cluster configuration. On the offline switch (switch2), delete the cluster by performing this task: Step 1 Step 2 Command switch# config t switch(config)# no sme cluster ABC Purpose Enters configuration mode. Deletes the ABC cluster configuration. Note Delete the cluster on every offline switch that was shut down in the first procedure. Deleting a Cisco SME Cluster when All Switches Are Offline To delete a Cisco SME cluster when the master switch and all other switches are offline, use these procedures. Note When all switches are offline, the cluster is offline. On the offline switch (for example, switch2), shut down the cluster by performing this task: Step 1 Step 2 Command switch# config t switch(config)#sme cluster ABC switch(config-sme-cl)#shutdown Purpose Enters configuration mode. Shuts down the ABC cluster on the offline switch. Note Repeat this procedure for every offline switch. OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide 9-3