HP Cisco MDS 9124 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 208

link-state-trap Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] link-state-trap To enable an Simple Network Management Protocol (SNMP) link state trap on an interface, use the link-state-trap command. To disable this feature, use the no form of the command. link-state-trap no link-state-trap Syntax Description This command has no arguments or keywords. Defaults None. Command Modes Interface configuration submode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines None. Examples The following example enables the link-state-trap on the SME interface: switch# config t switch(config)# interface sme 4/1 switch(config-if)# link-state-trap The following example disables the link-state-trap on the SME interface: switch# config t switch(config)# interface sme 4/1 switch(config-if)# no link-state-trap A-20 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x