HP Cisco MDS 9140 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 229
Defaults, Command Modes, Command History, Usage Guidelines, Examples, Release, Modification, volgrp
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Appendix A Cisco SME CLI Commands show sme cluster Send documentation comments to [email protected] volgrp volume group name detail summary Displays tape volume group name. The maximum length is 32 characters. Displays Cisco SME cluster details. Shows Cisco SME cluster summary. Defaults None. Command Modes EXEC mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the configuration details about a cluster: switch# show sme cluster c1 Cluster ID is 0x2b2a0005300035e1 Cluster status is online Security mode is advanced Total Nodes are 1 Recovery Scheme is 2 out of 5 Fabric[0] is Fabric_name-excal10 KMC server 10.21.113.117:8800 is provisioned, connection state is initializing Master Key GUID is 10af119cfd79c17f-ee568878c049f94d, Version: 0 Shared Key Mode is Not Enabled Auto Vol Group is Not Enabled Tape Compression is Not Enabled Tape Key Recycle Policy is Not Enabled Key On Tape is Not Enabled Cluster Infra Status : Operational Cluster is Administratively Up Cluster Config Version : 24 The following example displays the cluster interface information: switch# show sme cluster clustername1 interface it-nexus Host WWN VSAN Status Switch Interface Target WWN 10:00:00:00:c9:4e:19:ed, 2f:ff:00:06:2b:10:c2:e2 4093 online switch sme4/1 OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide A-41