HP Cisco MDS 9140 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 69
Selecting Advanced Security, In the Master Key Security screen, select
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 4 Cisco SME Cluster Management Creating a Cisco SME Cluster Using the Cisco SME Wizard Send documentation comments to [email protected] Selecting Advanced Security When Advanced security is selected, you need to designate the number of cards that are required to recover the master key. This can be 2 or 3 of 5 smart cards or 2 of 3 smart cards. You will need to configure all 5 smart cards during the cluster creations process; however, you will only need the quorum number (that you designated in this step), to recover the master key. In the Master Key Security screen, select Advanced. Enter the number of required smart cards for the quorum (2 of 3 or 2 of 5 or 3 of 5). Click Next. • For Advanced security, 5 Cisco SME Recovery Officers must be present to login and enter the smart card PIN for each of the 5 smart cards. • Be sure that the smart card reader is connected using the USB port (see "Installing Smart Card Drivers" section on page 2-17 in Chapter 2, "Getting Started"). • When you insert a smart card into the reader, the card will be verified. You will be prompted to initialize the card if the card has not been previously initialized. OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide 4-7