HP Cisco MDS 9140 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 35
Enabling Clustering, Enabling Clustering Using Fabric Manager
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Getting Started Before You Begin Send documentation comments to [email protected] • Creating and Assigning Cisco SME Roles and Cisco SME Users, page 2-9 • Installing Fabric Manager, Fabric Manager Client, and Enabling HTTPS, page 2-12 • Adding a Fabric and Changing the Fabric Name, page 2-13 • Choosing a Key Manager, page 2-16 • Using FC-Redirect with CFS Regions, page 2-17 • Installing Smart Card Drivers, page 2-17 • Obtaining and Installing Licenses, page 2-18 • Cisco SME Configuration Overview, page 2-18 Before configuring Cisco SME, you must explicitly enable clustering, Cisco SME, SSH, and DNS on the MDS switch with an installed MSM-18/4 module or on the MDS 9222i switch. By default, these are disabled. The configuration and verification operations for Cisco SME are only available when these are enabled on a switch. Enabling Clustering You can enable clustering on the Cisco MDS 9000 switch with an installed MSM-18/4 module using Fabric Manager and Device Manager 3.2(2c) or later, or Cisco NX-OS 4.x. Note Be sure to enable clustering first, then enable Cisco SME. This section includes the following topics: • Enabling Clustering Using Fabric Manager, page 2-3 • Enabling Clustering Using Device Manager, page 2-5 Enabling Clustering Using Fabric Manager To enable clustering using Fabric Manager, follow these steps: OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide 2-3