HP Cisco MDS 9140 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 235
sme, Con s the transport information.
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Appendix A Cisco SME CLI Commands sme Send documentation comments to [email protected] sme To enable or disable the Cisco SME services, use the sme command. sme {cluster name | transport ssl trustpoint trustpoint label} Syntax Description cluster name transport ssl trustpoint trustpoint label Configures the cluster. Identifies the cluster name. Configures the transport information. Configures the transport SSL information. Configures the transport SSL trustpoint. Identifies the trustpoint label. Defaults Disabled. Command Modes Configuration mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines Cisco SME services must be enabled to take advantage of the encryption and security features. To use this command, you must enable Cisco SME clustering using the feature cluster command. Examples The following example shows how to configure a cluster: switch# config t sw-sme-n1(config)# sme cluster clustername sw-sme-n1(config-sme-cl)# OL-18091-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Storage Media Encryption Configuration Guide A-47