HP Cisco MDS 9216A Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 944

setup ficon Chapter 21 S Commands Send documentation comments to [email protected] setup ficon To enter the automated FICON setup mode, use the setup ficon command in EXEC mode. setup ficon Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines Refer to the Cisco MDS 9000 Family CLI Configuration Guide for more information on using the setup ficon command. The setup utility guides you through the basic configuration process. Type Ctrl-c at any prompt to skip the remaining configuration options and proceed with what is configured to that point. If you do not want to answer a previously-configured question, or if you wish to skip answers to any questions, press Enter. If a default answer is not available (for example switch name), the switch uses what is already configured, and skips to the next question. Examples The following example shows how to enter switch setup mode. switch# setup ficon ---- Basic System Configuration Dialog ---- --- Ficon Configuration Dialog --- This setup utility will guide you through basic Ficon Configuration on the system. Press Enter if you want to skip any dialog. Use ctrl-c at anytime to skip all remaining dialogs. Would you like to enter the basic configuration dialog (yes/no): yes 21-26 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x