HP Cisco MDS 9216A HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7P - Page 37

Virtual targeting, iSCSI Initiator zoned with an EVA storage port, The Targets tab

Get HP Cisco MDS 9216A - Fabric Switch PDF manuals and user guides View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Figure 31 iSCSI Initiator zoned with an EVA storage port Virtual targeting Before the iSCSI Initiator can log in to the storage controller, you must create virtual targets on each C-Series Fibre Channel switch in the iSCSI window. 1. Using the Cisco Device Manager, select IP > iSCSI from the Device Manager menu bar. The IP iSCSI window opens (Figure 28). 2. Click the Targets tab (Figure 32). Figure 32 The Targets tab 3. Click Create. The Create iSCSI Targets window opens (Figure 33). 4. In the Create iSCSI Targets window, enter a name for the iSCSI Name box. 5. Select the target storage port from the Port WWN list. 6. Under Initiator Access, select an Initiator. Select All if the list is empty. 7. Under Advertised Interfaces, select the port connected to the host iSCSI Initiator. C-Series iSCSI 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Figure 31 iSCSI Initiator zoned with an EVA storage port
Virtual targeting
Before the iSCSI Initiator can log in to the storage controller, you must create virtual targets on each
C-Series Fibre Channel switch in the iSCSI window.
1.
Using the Cisco Device Manager, select
IP > iSCSI
from the Device Manager menu bar.
The IP iSCSI window opens (
Figure 28
).
2.
Click the
Targets
tab (
Figure 32
).
Figure 32 The Targets tab
3.
Click
Create
.
The Create iSCSI Targets window opens (
Figure 33
).
4.
In the Create iSCSI Targets window, enter a name for the iSCSI Name box.
5.
Select the target storage port from the Port WWN list.
6.
Under Initiator Access, select an Initiator. Select
All
if the list is empty.
7.
Under Advertised Interfaces, select the port connected to the host iSCSI Initiator.
C-Series iSCSI
37