HP Cisco MDS 9216i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 1128

show fcroute Chapter 22 Show Commands Send documentation comments to [email protected] show fcroute Use the show fcroute command to view specific information about existing Fibre Channel and FSPF configurations. show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id] | summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]} Syntax Description distance label multicast summary unicast vsan vsan-id fcid-id Displays FC route preference. Displays label routes. Displays FC multicast routes. Displays the FC routes summary. Displays FC unicast routes. Specifies the ID of the VSAN (from 1 to 4093). Specifies the Fibre Channel ID. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are included in the total number of routes. Examples The following example displays administrative distance. switch# show fcroute distance Route UUID Distance Name ---- 10 20 RIB 22 40 FCDOMAIN 39 80 RIB-CONFIG 12 100 FSPF 17 120 FLOGI 21 140 TLPM 14 180 MCAST 64 200 RIB-TEST The following example displays multicast routing information. switch# show fcroute multicast VSAN FC ID # Interfaces 22-96 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x