HP Cisco MDS 9216i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 972

Chapter 21 S Commands ssh Send documentation comments to [email protected] ssh To initiate a Secure Shell (SSH) session, use the ssh command in EXEC mode. ssh {hostname | userid@hostname} Syntax Description hostname userid Specifies the name or IP address of the host to access. Specifies a user name on a host. Defaults The default user name is admin. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example shows how to initiate an SSH session using a host name. switch# ssh host1 admin@1host1's password: The following example shows how to initiate an SSH session using a host IP address. switch# ssh 10.2.2.2 [email protected]'s password: The following example shows how to initiate an SSH session using a user name host name. switch# ssh user1@host1 user1@1host1's password: Related Commands Command show ssh key ssh server enable Description Displays SSH key information. Enables SSH server. 21-54 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x