HP Cisco MDS 9216i Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS - Page 936

security-mode Chapter 21 S Commands Send documentation comments to [email protected] security-mode To configure the Cisco SME security settings, use the security-mode command. To delete the security settings, use the no form of the command. security-mode {basic | standard | advanced {schema threshold threshold total total }} no security-mode {basic | standard | advanced {schema threshold threshold total total } Syntax Description basic standard advanced schema threshold threshold total total Sets the Cisco SME security level to basic. Sets the Cisco SME security level to standard. Sets the Cisco SME security level to advanced. Configures the recovery schema. Configures the recovery schema threshold. The limit is 2-3. Configures the recovery schema total.The limit is 5-5. Defaults None. Command Modes Cisco SME cluster configuration submode. Command History Release 3.2(2) Modification This command was introduced. Usage Guidelines None. Examples The following example sets the security mode to basic: switch# config t switch(config)# sme cluster c1 switch(config-sme-cl)# security-mode basic The following example sets the security mode to advanced: switch# config t switch(config)# sme cluster c1 switch(config-sme-cl)# security-mode advanced schema threshold 3 total 5 Related Commands Command show sme cluster Description Displays information about the security settings. 21-18 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x