HP Cisco MDS 9222i Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 561

Chapter 29 Configuring Inter-VSAN Routing Manual IVR Configuration Send documentation comments to [email protected] Note Repeat this configuration in all IVR-enabled switches or distribute using CFS. Tip Transit VSANs are deduced based on your configuration. The IVR feature does not have an explicit transit-VSAN configuration. Activating a Manually Configured IVR Topology After manually configuring the IVR topology , you must activate it. Caution Active IVR topologies cannot be deactivated. You can only switch to IVR topology automatic mode. To activate the manually configured IVR topology using Fabric Manager, follow these steps: Step 1 Expand All VSANs and then select IVR in the Logical Domains pane. You see the IVR configuration in the Information pane. Figure 29-9 Action Tab Step 2 Step 3 Step 4 Click the Action tab to display the existing IVR topology. Check the Activate Local Topology check box (see Figure 29-9). Click the Apply Changes icon to activate the IVR topology. Clearing the Configured IVR Topology You can only clear manually created IVR VSAN topology entries from the configured database. To clear the IVR topology using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Expand All VSANs and then select IVR in the Logical Domains pane. Click the Control tab if it is not already displayed. Highlight the rows you want to delete from the IVR topology. Click the Delete Row icon to delete these rows from the IVR topology. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 29-17