HP DesignJet 3000 HP DesignJet 2000/2500 - User's Guide - Page 281
Message, Explanation and Action, Checking the Ink Cartridges.
View all HP DesignJet 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Front-Panel Messages Message Explanations and Actions Message Explanation and Action Check ink cartridges ssts Abort → The printer has detected an error in the cartridges indicated by the empty squares. Reseat (do not replace) the indicated cartridges or press the ↓ key to terminate the procedure. In this case, you will not be able to print, and you may later resume checking the ink system by pressing the Replace Ink System button. See 11-40, Checking the Ink Cartridges. Check ink system→ Ignore→ After an error has been detected in the ink system, you are given the chance to check it. Press ↑ to check the ink system right now. The printer will indicate which ink systems are affected. Press ↓ to ignore the error and continue printing. In this case the image quality cannot be assured. To fix any errors, see the check-lists in 11-38, Checking Ink Systems. Check printheads ssts Abort → The printer has detected an error in the printheads indicated by the empty squares. The printhead can be replaced, but you should replace all components of the failing ink systems as soon as possible. Reseat (do not replace) the indicated printheads or press the ↓ key to terminate the procedure. In this case, you will not be able to print, and you may later resume checking the ink system by pressing the Replace Ink System button. (If you have persistent problems, see If You Have Problems Reseating a Printhead 11-41.) Close left door to continue You opened the left door while the printer was busy, or you have finished installing the ink cartridges. Close the left door to continue. Close roll cover Continue→ Rewind the media to take up any slack in the roll, close the roll cover, then press ↓ to continue. Close window to continue You have finished installing the printheads. Close the window to continue. Create pattern→ Measure pattern→ Press ↑ to create the pattern for automatic calibration. Press ↓ to measure the pattern for automatic calibration. Disk error Continue→ (HP DesignJet 2500CP only) An error on the hard disk has been detected. Press ↓ to continue. 12-3