HP DreamColor Z31x User Guide - Page 36
Digital cinema aspect ratio masking, Using the digital cinema aspect ratio masking options
View all HP DreamColor Z31x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4. Select Image scaling to show the display options. 5. Use the Up/Down buttons to navigate to the desired open option then press the Select button to select it. NOTE: The Image scaling menu can be reassigned to a bezel Function button for easy access. Refer to Changing the bezel function buttons on page 38 for instructions on assigning the bezel Function button. Digital cinema aspect ratio masking The display supports aspect ratio masking for the two standard aspect ratios, 1.85:1 and 2.39:1, within the DCI image container. When digital cinema masking is enabled, the source signal is masked to only show the pixels within the chosen aspect ratio. The following table lists the active pixels that will be displayed for each image container and aspect ratio. DCI Container Size 4096 × 2160 4096 × 2160 2048 × 1080 2048 × 1080 Aspect Ratio 1.85:1 2.39:1 1.85:1 2.39:1 Horizontal Active Pixels 3996 4096 1998 2048 Vertical Active Pixels 2160 1716 1080 858 Using the digital cinema aspect ratio masking options All of the digital cinema display options are located in the OSD on the Main menu > Image adjustment > Digital Cinema Masking page. These options are unavailable and the menu option dimmed unless one of the following resolutions is being displayed using the active video input: ● 4096×2160 ● 2048×1080 To access the digital cinema masking options: 1. Connect a computer or video device to the display that is configured to output a 4096×2160 or 2048×1080 signal. 2. Press any button on the front bezel. 3. Press the Open Menu button to open the OSD. 4. Select Image adjustment to display the adjustment options screen. 5. Select Digital cinema masking to display the digital cinema options. The following digital cinema masking options are available. Show entire DCI container This is the default option and will show the entire 4096×2160 or 2048×1080 frame. Mask to DCI 1.85:1 aspect ratio This option masks the left- and right-most 50 pixels of the 4096-wide frame (the left- and right-most 25 pixels for 2048-wide sources). The resultant image is then displayed as specified using the image scaling options described in the previous section. The following illustration shows a DCI source cropped to 1.85:1. 26 Chapter 2 Using the display