HP Engage Go 13.5 User Guide - Page 14

Multicharger components You can charge up to four mobile head units in the multicharger. To identify charger features, use this illustration and table. NOTE: You can use the multicharger only with grip models, whether mobile or convertible systems. Table 2-5 Identifying the multicharger features Features 1 Locking dial 2 RJ-45 (network) jack 3 Power switch 4 Power light 5 Power connector 6 Security cable slot Connecting an AC adapter to power To connect an AC adapter to the I/O connectivity base, use this procedure and illustration. ■ To connect an AC adapter to the I/O connectivity base, connect one end of the power cord to the AC adapter (1) and the other end to a grounded AC outlet (2), and then connect the AC adapter to the power connector on the I/O connectivity base (3). ■ To connect an AC adapter to the mobile system when it is not connected to an I/O connectivity base, connect the AC adapter to a grounded AC outlet (1), and then connect the power adapter's USB Type-C connector to the USB Type-C power port on the underside of the stand or stability base (2). NOTE: The power light illuminates when a valid AC adapter is used. If an invalid AC adapter is used, the light does not turn on, even if the adapter is plugged into a wall socket. Multicharger components 9