HP Engage Go 13.5 User Guide - Page 26
Mounting the mobile system to a countertop
View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Mounting the mobile system to a countertop You can use an optional countertop mounting bracket to mount the computer head unit and column to a countertop. NOTE: The mounting bracket requires an 80 mm (3 in) hole in the countertop. The thickness of the countertop must be 10 mm (0.4 in) to 50 mm (2 in). To mount the mobile system: 1. If the dock's stability base is attached to the column, remove the screw on the underside of the column (1), and then remove the base (2) from the column. 2. Route the cables through the routing hole on the top piece of the mounting bracket (1) and attach the cables to the bottom of the column (2). Mounting the mobile system to a countertop 21
Mounting the mobile system to a countertop
You can use an optional countertop mounting bracket to mount the computer head unit and column to a
countertop.
NOTE:
The mounting bracket requires an 80 mm (3 in) hole in the countertop. The thickness of the
countertop must be 10 mm (0.4 in) to 50 mm (2 in).
To mount the mobile system:
1.
If the dock’s stability base is attached to the column, remove the screw on the underside of the column
(1)
, and then remove the base
(2)
from the column.
2.
Route the cables through the routing hole on the top piece of the mounting bracket
(1)
and attach the
cables to the bottom of the column
(2)
.
Mounting the mobile system to a countertop
21