HP Engage Go 13.5 User Guide - Page 17

Regulatory information is located in the base plate or wall mount. To see this information, you must disassemble the base plate or wall mount. Be sure to install the base plate or wall mount back after disassembly. Installing a security cable on the I/O connectivity base You can secure the I/O connectivity base to a fixed object with an optional keyed security cable lock and an optional security cable available from HP. NOTE: The security cable is sold separately as an aftermarket option kit only. 1. Locate the security cable slot on the back of the I/O connectivity base. 2. Insert the security cable lock into the slot, and then use the key to lock it. Installing a security cable on the mobile system column You can secure the I/O connectivity base to a fixed object with an optional security cable and an optional security cable lock available from HP. NOTE: The security cable lock and security cable are sold separately as an aftermarket option kit only. 1. Remove the screw from the bottom of the column (1). 2. Attach the security cable lock to the bottom of the column using the tamper-resistant screw (2) included with the security cable extension. 3. Secure the other end of the security cable lock with a security cable (3), and then lock it in place with the key. 12 Chapter 2 Computer features