HP Engage Go 13.5 User Guide - Page 30
Reconnect the I/O connectivity base and power cords.
View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
and then attach the bracket on the fingerprint reader assembly to the underside of the I/O connectivity base (4) using the screw that was removed from the base and the short screw included in the kit. 5. Connect the fingerprint reader cable to a USB Type-A port on the I/O connectivity base. 6. Reconnect the I/O connectivity base and power cords. Attaching an optional fingerprint reader to the I/O connectivity base 25
and then attach the bracket on the fingerprint reader assembly to the underside of the I/O connectivity
base
(4)
using the screw that was removed from the base and the short screw included in the kit.
5.
Connect the fingerprint reader cable to a USB Type-A port on the I/O connectivity base.
6.
Reconnect the I/O connectivity base and power cords.
Attaching an optional fingerprint reader to the I/O connectivity base
25