HP Integrity Superdome 2 16-socket HP Superdome 2 Partitioning Administrator G - Page 42
Verifying newly created nPartitions using the OA GUI, Removing an nPartition
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[Blade] Enclosure/ Usage/ CPU Memory Use Par Pending Blade Status* OK/ (GB) On Num Deletion Indicted/ OK/ Next Deconf/ Indicted/ Boot Max Deconf 1/1 Active Base /OK 8/0/0/8 128.0/0.0/0.0 yes 1 no 1/2 Active Base /OK 8/0/0/8 128.0/0.0/0.0 yes 1 no * D-Deconfigured I-Indicted [IOBay] Enclosure/ Usage/ Par Pending IOBay Status* Num Deletion * D-Deconfigured I-Indicted Verifying newly created nPartitions using the OA GUI To verify that the partitions are defined as desired, select the nPartition from the Complex nPartitions table, and then click the Status tab. Figure 8 nPartition Status Information Removing an nPartition This section describes the procedure to remove an nPartition using both the OA interfaces. Removing an nPartition using the OA CLI The parremove command removes an existing nPartition by unassigning all blades and I/O bays from the nPartition. The target nPartition must be inactive unless the -F option is used. By default, the current partition specification (parspec) associated with the nPartition is not removed when the nPartition is removed. The current parspec associated with the nPartition becomes an alternate 42 Creating and configuring nPartitions