HP Integrity Superdome 2 16-socket Cisco Nexus B22 Fabric Extender for HP Gett - Page 12
Displaying Fabric Extender Information, Displaying Configuration Information
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Configuring the Cisco Nexus B22 Fabric Extender for HP The next time that you reboot the Fabric Extender, the configured fabric interfaces are pinned to the host interfaces in an ascending order by port number of the fabric interface. If you want to configure the same fixed distribution of host interfaces without restarting the Fabric Extender, enter the fex pinning redistribute command. To redistribute the host interfaces on the Fabric Extender, perform this task: Command switch# fex pinning redistribute chassis Purpose Redistributes the host connections. The range of the chassis ID is from 100 to 199. This example shows how to redistribute the host interfaces on a Fabric Extender: switch# fex pinning redistribute 100 Caution The fex pinning redistribute command disrupts all the host interface ports of the Fabric Extender. For additional information about configuring the Cisco Nexus B22 Fabric Extender for HP and Cisco Nexus 5000 Series Switches, see the following documentation: • Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide http://www.cisco.com/en/US/docs/switches/datacenter/nexus2000/sw/configuration/guide/rel_4_0 _1a/NX2000CLIConfig.html • Cisco Nexus 5000 Series NX-OS Software Configuration Guide http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_ 4_0_1a/CLIConfigurationGuide.html Displaying Fabric Extender Information This section describes the show commands that are available to display the configuration and status of the Fabric Extender and includes the following topics: • Displaying Configuration Information, page 12 • Displaying Chassis Management Information, page 15 Displaying Configuration Information To display configuration information about the defined interfaces, perform one of these tasks: Command switch# show fex [chassis [detail] switch# show interface type number fex-intf switch# show interface fex-fabric Purpose Displays information about a specific Fabric Extender or all attached units. Displays the Fabric Extender ports pinned to a specific switch interface. Displays the switch interfaces that have detected a Fabric Extender uplink. Cisco Nexus B22 Fabric Extender for HP Getting Started Guide 12