HP Integrity Superdome 2 16-socket Cisco Nexus B22 Fabric Extender for HP Gett - Page 14
This example shows how to display the SFP+ transceiver and diagnostic optical monitoring DOM
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Configuring the Cisco Nexus B22 Fabric Extender for HP 06/22/2011 22:09:48.198227: Deleting route to FEX 06/22/2011 22:09:48.203294: Module disconnected 06/22/2011 22:09:48.204160: Offlining Module 06/22/2011 22:09:48.204977: Module Offline Sequence 06/22/2011 22:09:48.527385: Module Offline 06/22/2011 22:10:23.644325: Module register received 06/22/2011 22:10:23.645444: Registration response sent 06/22/2011 22:10:23.864695: Module Online Sequence 06/22/2011 22:10:25.289316: Module Online This example shows how to display the Fabric Extender interfaces pinned to a specific switch interface: switch(config-fex)# show interface ethernet 1/19 fex-intf 'Fabric FEX Interface Interfaces Eth1/19 Eth100/1/4 Eth100/1/3 Eth100/1/2 Eth100/1/1 This example shows how to display the switch interfaces that are connected to a Fabric Extender uplink: switch(config-fex)# show interface fex-fabric Fabric Fabric Fex FEX Fex Port Port State Uplink Model Serial 100 Eth1/19 Active 1 N2K-B22HP-P FOC1514256S 100 Eth1/20 Active 2 N2K-B22HP-P FOC1514256S 100 Eth1/21 Active 3 N2K-B22HP-P FOC1514256S 100 Eth1/22 Active 4 N2K-B22HP-P FOC1514256S switch(config-fex)# Note The above example shows a Fabric Extender with four uplink connections, only one of which is currently active. This example shows how to display the SFP+ transceiver and diagnostic optical monitoring (DOM) information for Fabric Extender uplinks: switch# show interface ethernet 1/40 transceiver Ethernet1/40 sfp is present name is CISCO-EXCELIGHT part number is SPP5101SR-C1 revision is A serial number is ECL120901AV nominal bitrate is 10300 MBits/sec Link length supported for 50/125mm fiber is 82 m(s) Link length supported for 62.5/125mm fiber is 26 m(s) cisco id is -cisco extended id number is 4 switch# show interface ethernet 1/40 transceiver fex-fabric Ethernet1/40 sfp is present name is CISCO-EXCELIGHT part number is SPP5101SR-C1 revision is A serial number is ECL120601U0 nominal bitrate is 10300 MBits/sec Link length supported for 50/125mm fiber is 82 m(s) Link length supported for 62.5/125mm fiber is 26 m(s) cisco id is -cisco extended id number is 4 Cisco Nexus B22 Fabric Extender for HP Getting Started Guide 14