HP Integrity Superdome 2 16-socket Cisco Nexus B22 Fabric Extender for HP Gett - Page 15

Displaying Chassis Management Information

Page 15 highlights

Configuring the Cisco Nexus B22 Fabric Extender for HP Note The first show command above shows the SFP+ transceiver that is plugged into the parent switch interface. The second show command displays the SFP+ transceiver that is plugged into the uplink port on the Fabric Extender. Displaying Chassis Management Information To display configuration information used on the switch supervisor to manage the Fabric Extender, perform one of these tasks: Command switch# show diagnostic result fex chassis switch# show inventory fex chassis switch# show module fex chassis Purpose Displays results from the diagnostic test for a Fabric Extender chassis. Displays inventory information for a Fabric Extender chassis. Displays module information about a Fabric Extender chassis. This example shows how to display the module information about all connected Fabric Extender units: switch(config-fex)# show module fex FEX Mod Ports Card Type Model Status. 100 1 16 Fabric Extender 16x10GE + 8x10G Module N2K-B22HP-P present FEX Mod Sw Hw World-Wide-Name(s) (WWN) 100 1 5.0(3)N2(1) 0.501 -- FEX Mod MAC-Address(es) Serial-Num 100 1 e8b7.484b.e880 to e8b7.484b.e88f FOC1514256S switch(config-fex)# switch(config-fex)# show module fex 100 FEX Mod Ports Card Type Model Status. 100 1 16 Fabric Extender 16x10GE + 8x10G Module N2K-B22HP-P present FEX Mod Sw Hw World-Wide-Name(s) (WWN) 100 1 5.0(3)N2(1) 0.501 -- FEX Mod MAC-Address(es 100 1 e8b7.484b.e880 to e8b7.484b.e88f switch(config-fex)# Serial-Num ---------FOC1514256S This example shows how to display the inventory information about a specific Fabric Extender unit: switch(config-fex)# show inventory fex 100 NAME: "FEX 100 CHASSIS", DESCR: "N2K-B22HP-P CHASSIS" PID: N2K-B22HP-P , VID: V00 , SN: FOC1516ZZLS NAME: "FEX 100 Module 1", DESCR: "Fabric Extender Module: 16x10GE, 8x10GE Supervisor" PID: N2K-B22HP-P , VID: V00 , SN: FOC1514256S switch(config-fex)# Cisco Nexus B22 Fabric Extender for HP Getting Started Guide 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

15
Cisco Nexus B22 Fabric Extender for HP Getting Started Guide
Configuring the Cisco Nexus B22 Fabric Extender for HP
Note
The first
show
command above shows the SFP+ transceiver that is plugged into the parent switch
interface. The second
show
command displays the SFP+ transceiver that is plugged into the uplink port
on the Fabric Extender.
Displaying Chassis Management Information
To display configuration information used on the switch supervisor to manage the Fabric Extender,
perform one of these tasks:
This example shows how to display the module information about all connected Fabric Extender units:
switch(config-fex)#
show module fex
FEX Mod Ports Card Type
Model
Status.
--- --- ----- ---------------------------------- ------------------ -----------
100 1
16
Fabric Extender 16x10GE + 8x10G Module
N2K-B22HP-P
present
FEX Mod Sw
Hw
World-Wide-Name(s) (WWN)
--- --- --------------
------
-----------------------------------------------
100 1
5.0(3)N2(1)
0.501
--
FEX Mod
MAC-Address(es)
Serial-Num
--- ---
--------------------------------------
----------
100 1
e8b7.484b.e880 to e8b7.484b.e88f
FOC1514256S
switch(config-fex)#
switch(config-fex)#
show module fex 100
FEX Mod Ports Card Type
Model
Status.
--- --- ----- ---------------------------------- ------------------ -----------
100 1
16
Fabric Extender 16x10GE + 8x10G Module
N2K-B22HP-P
present
FEX Mod Sw
Hw
World-Wide-Name(s) (WWN)
--- --- --------------
------
-----------------------------------------------
100 1
5.0(3)N2(1)
0.501
--
FEX Mod
MAC-Address(es)
Serial-Num
--- ---
--------------------------------------
----------
100 1
e8b7.484b.e880 to e8b7.484b.e88f
FOC1514256S
switch(config-fex)#
This example shows how to display the inventory information about a specific Fabric Extender unit:
switch(config-fex)#
show inventory fex 100
NAME: "FEX 100 CHASSIS", DESCR: "N2K-B22HP-P
CHASSIS"
PID: N2K-B22HP-P
, VID: V00 , SN: FOC1516ZZLS
NAME: "FEX 100 Module 1", DESCR: "Fabric Extender Module: 16x10GE, 8x10GE Supervisor"
PID: N2K-B22HP-P
, VID: V00 , SN: FOC1514256S
switch(config-fex)#
Command
Purpose
switch#
show diagnostic result fex
chassis
Displays results from the diagnostic test for a Fabric
Extender chassis.
switch#
show inventory fex
chassis
Displays inventory information for a Fabric Extender
chassis.
switch#
show module fex
chassis
Displays module information about a Fabric Extender
chassis.