HP Integrity Superdome SX2000 User Guide, Sixth Edition - HP Integrity Superdo - Page 83

Installing the System Booting and Verifying the System Step 2. At the "Select Device" prompt, enter B then the cabinet number to check the power status of the cabinet. Observe that the Power Switch: on and Power: enabled as shown in Figure 2-51. Figure 2-51Power Status Window Figure 2-51 shows that cells are installed in slots 0 and 4. In the cabinet, there should be cells physically located in slots 0 and 4. Step 3. Enter ps from the Command Menu, or if proceeding from Step 2.in the previous section, simply press one more time to observe the status as shown in Figure 2-52. Figure 2-52Power Status Showing State of UGUY LEDs (and other status) Chapter 2 71