HP Integrity rx1620 Internal Cabling Guide for HP Smart Array Controllers - Page 23
Smart Array Controller Card with Dual Partition Cabling, Step 1.
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Cabling for the HP Integrity rx8640 Server Dual Partition Configurations Figure 2-6 Smart Array Controller Card with Dual Partition Cabling Removable Media Cable Bundle Ties PCI Lift Handle Port A1 and Top Right HDD Cable Connections Port A2 and Top Left HDD Cable Connections RAID Cabling for IO Chassis 1 (Bottom Left and Bottom Right Hot Plug Hard Drives) To set up the RAID cabling on the bottom left and bottom right hot plug hard drives, do the following, from the front of the server: Step 1. Verify that the HP Smart Array controller card is installed in PCI slot 8 of IO Chassis 1. Step 2. Retrieve two cables from the cable kit (A7027-63001). Step 3. Identify the new cables using the colored cable ties which are also contained in the cable kit (for each cable, use two of the same color, one on each end). Using a different color tie on each cable makes it easier to identify the cables for installation and servicing. NOTE One end of each cable has a pull-tab connected to the SCSI connector which is labeled "This Connector to PCI Card". This end of the cable connects to the HP Smart Array card. Chapter 2 19