HP Integrity rx1620 Internal Cabling Guide for HP Smart Array Controllers - Page 79
Cabling for the HP Integrity rx2620 and rx2600 Servers, Table 8-1
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
8 Cabling for the HP Integrity rx2620 and rx2600 Servers This chapter describes how to connect the cables of an HP Smart Array 5302, 5304, or 6402 controller card to the internal hard drives of an HP Integrity rx2620 or rx2600 Server. NOTE These instructions do not apply if you are connecting the controller card to an external mass storage box. Refer instead to the HP Smart Array Controller User Guide that shipped with your card. The Smart Array 5300 series of controller cards includes two models: the 5302 and the 5304. Model 5302 has two Wide Ultra160 SCSI channels and 128 MB of cache. Model 5304 has four Wide Ultra160 SCSI channels and 256 MB of cache. The Smart Array 6400 series of controller cards includes two models: the 6402 and the 6404. Model 6402 has two Wide Ultra320 SCSI channels and 128 MB of cache. Model 6404 has four Wide Ultra320 SCSI channels and 256 MB of cache. Only Models 5302, 5304, and 6402 are supported on HP Integrity rx2620 and rx2600 servers. Table 8-1 shows the product numbers and descriptions for these cards. Table 8-1 Smart Array Cards Available for the HP Integrity rx2620 and rx2600 Servers Controller SA5302 SA5304 SA6402 Product Number Description A9825A 2 channel / 128 MB cache A9826A 4 channel / 256 MB cache A9890A 2 channel / 128 MB cache Before you begin, you need: • Cable kit for single channel configuration (part number: A7231-63024), or • Cable kit for dual channel configuration (part number: A7231-63025) • T-15 Torx driver • 3/16-inch hex driver • Smart Array controller card (see Figure 8-1, Figure 8-2, and Figure 8-3) Chapter 8 75