HP J7934A HP Jetdirect 620n Print Server Setup Guide - Page 39

Table C-1. EIO Classic Control Panel Menu (3 of 3) Menu Item CFG IPX/SPX= CFG LINK= WEB= SECURITY= Description Selects whether you want to access the IPX/SPX menu and set IPX/SPX protocol parameters. ● NO (default): Bypass the IPX/SPX menu items. ● YES: Access the IPX/SPX menu items. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. ■ AUTO (default) will automatically set and limit the frame type to the first one detected. ■ For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP. . Selects whether you want to manually configure the HP Jetdirect print server's network link. ● NO (default): Bypass the link configuration menu items. ● YES: Access the link configuration menu items. One of the following link configurations can be set: ■ AUTO (default): The print server will automatically configure itself to match the network's link speed and communication mode. If it fails, 100T HALF is set. ■ 10T HALF: 10 Mbps, half-duplex operation. ■ 10T FULL: 10 Mbps, full-duplex operation. ■ 100T HALF: 100 Mbps, half-duplex operation ■ 100T FULL: 100 Mbps, full-duplex operation For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. ● HTTPS: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. ● HTTP/HTTPS: Access using either HTTP or HTTPS is permitted. Specify whether the current security settings on the print server will be saved or reset to factory defaults. ● KEEP (default): The current security settings are maintained. ● RESET: Security settings are reset to factory defaults. ENWW HP Jetdirect EIO Control Panel Menus 39