HP LD4200 HP LD4200 and LD4700 LCD Monitors User Guide - Page 30
Using the Auto-Adjustment Function, Open Auto-Adjustment Software
UPC - 884420598480
View all HP LD4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the Auto-Adjustment Function You can optimize the screen performance for the VGA (analog) input by using the Auto/Set button on the monitor (AUTO button on the remote control) and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using an HDMI to DVI input. If the monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions: ● Fuzzy or unclear focus ● Ghosting, streaking or shadowing effects ● Faint vertical bars ● Thin, horizontal scrolling lines ● An off-center picture To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the Auto/Set button on the back side of the monitor panel. If the result is not satisfactory, continue with the procedure. 3. Insert the CD in the disc drive. The CD menu is displayed. 4. Select Open Auto-Adjustment Software. The setup test pattern is displayed. 5. Press the Auto/Set button on the back side of the monitor panel to produce a stable, centered image. 6. Press the ESC key or any other key on the keyboard to exit the test pattern. 22 Chapter 4 Operating the Monitor ENWW