HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 38
Battery, Pivot the battery upward
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Battery Description 3-cell, 26-Wh Li-Pol battery for use in all countries and regions except Germany 3-cell, 26-Wh Li-Pol battery for use only in Germany Spare part number 504610-001 504610-002 Before disassembling the device, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. Remove the battery: 1. Turn the device upside down on a flat surface, with the battery bay toward you. 2. Slide the battery release latches (1) to release the battery. 3. Pivot the battery upward (2) and remove the battery (3) from the device. To install the battery, insert the rear edge of the battery into the battery bay and pivot the battery downward until it is seated. The battery release latch automatically locks the battery into place. 30 Chapter 4 Removal and replacement procedures